Advertisement
Phenomenon: Cannot send an e-mail correctly.
Item to be checked
Are e-mail settings correct?
Are the settings of Sender e-mail
Address correct?
Is a test e-mail sent correctly?
Is only e-mail regarding the
specific Error/Warning not sent
correctly?
Phenomenon: An e-mail does not reach only to the specific address.
Item to be checked
Is e-mail address set correctly?
Is filtering or forwarding set for
the e-mail address in the mail
server?
Solutions
Check the settings on the Mail Settings screen
of the Projector Web Control.
Set valid e-mail address.
Check if a test e-mail is sent correctly by
pressing the [Send Test Mail] button on the
Mail Settings screen of the Projector Web
Control.
Check if the specific Error/Warning is set to
be sent on the Mail Settings screen of the
Projector Web Control.
Solutions
Check the settings on the Mail Settings screen
of the Projector Web Control.
Consult with your network administrator.
9. Troubleshooting
109
Advertisement
