Advertisement
SET UP INSTRUCTIONS
Place the Stamina® Folding Exercise Bike 182 in the area where it will be used. It is recommended
that the Stamina® Folding Exercise Bike 182 be placed on an equipment mat. The Stamina® Folding
Exercise Bike 182 is approximately 33.4 inches long x 17.7 inches wide x 43.4 inches tall. (These
dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of
the Stamina® Folding Exercise Bike 182. Make sure that adequate space is available for access to
and passage around the Stamina® Folding Exercise Bike 182.
LEVELING: Adjust the LEVELING CAPS(15) on the REAR STABILIZER(5) at the back so that the
Stamina® Folding Exercise Bike 182 sits on the floor without rocking.
MOVING: The Stamina® Folding Exercise Bike 182 has a pair of WHEELS on the WHEEL
ENDCAPS(31) on the FRONT STABILIZER(3) at the front. Hold the HANDLEBAR(7) and
tilt forward on WHEELS to move the Stamina® Folding Exercise Bike 182.
FUNCTION INSPECTION:
Visually inspect the Stamina® Folding Exercise Bike 182 to verify that assembly is as shown in the
above illustration. Check the function of the Stamina® Folding Exercise Bike 182 by turning the
crank slowly through one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(24) and verify that it functions properly and the resistance changes.
CAUTION: Locate and read the CAUTION LABEL(85) on the Stamina® Folding Exercise Bike 182.
Make sure that all users read the CAUTION LABEL(85) before using the product.
11
Equipment Mat
(not included)
Advertisement
