Panasonic KX-TVM50 Installation Manual page 58

2.8 Installing Optional Cards—KX-TVM200/KX-NCV200
2.8.1 4-Port Digital Expansion Card (KX-TVM204)
Each KX-TVM204 adds 4 ports to the VPS which can be used for DPT Integration. KX-TVM204 cards
can be installed in slots 1 to 6 of the VPS.
Integration Type
DPT Integration
Included Items
Extension Bolt × 3, Screw × 3
Installation
1.
Position the front of the card so that the jacks fit in the open slot. Make sure that the tabs on both
sides of the card fit into place. Holding the card firmly in place, lower the other end of the card so
that the card's hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in
damage to the VPS.
Extension Bolt
58 Installation Manual
Basic Configuration
No. of Jacks No. of Ports
0
2
Maximum Configuration
(KX-TVM204 x 6)
No. of Jacks
0 12
1
No. of Ports
24 (2 per jack)