Ricoh FW780 Operating Instructions Manual page 30

Copying
If you select the Bypass table, Center the paper face up on the bypass table
and slide the paper straight into the copier.
2
E
Set the original guides to match the original size mark. Place the original
face down and slide it straight into the copier along the original guides.
Note
Do not force to remove the original once you set it and if you want to
change the position of your original or set another original. In this case,
press the {Clear/Stop} key to eject the original.
F
If you are ready to make copy, press the { { { { Start} } } } key.
18