Ricoh FW780 Operating Instructions Manual page 16

The program indicator(LED) lights after
you store the setting.
{ { { { Function Select} } } } key
11.
Press to change which setting you are ed-
iting. The current selection is shown by
the indicators above the key:
• Paper Length
• Leading Edge
• Trailing Edge
• Copy Counter
Also used for copying a selected portion
of the original.
{ { { { +} } } } and { { { { —} } } } key
12.
Press to increase the value being edited.
Press to decrease the value being edited.
13.
Leading Edge/Trailing Edge/
Copy Counter indicator
Displays the margin settings and the
number of copies made.
14.
Roll Feeder indicator
Light up when you select Roll Feeder 1 or
2.
{ { { { Paper Select/Cut} } } } key
15.
Use to select the paper feed type such as
Roll feeder 1, 2 and Bypass Tray. Also
press to stop a copy job.
{ { { { Copy Media} } } } key
16.
Press to select the type of copy paper you
are using.
The copier will apply more or less heat
accordingly.
• The top indicator-Translucent paper
indicator
• The bottom indicator-Film indicator
{ { { { Emergency Stop} } } } key
17.
Press to stop the copying process imme-
diately.
Use if your original is getting stuck in the
copier.
If you stop operation by pressing this
key, remove the original.
4
Density indicator and { { { { i
18.
j } } } } keys
{j j j
Shows the density level the copies will
have.
Press the left key to make copies lighter.
Press the right key to make copies darker.
{ { { { Start} } } } key
19.
Press to start copying when you select
manual feed mode. Otherwise, the copy
job automatically start after you place
both paper and original. For details about
manual feed mode,
Mode"
20.
Green indicator
Lights up when you select the manual
feed mode.
{ { { { Clear/Stop} } } } key
21.
When entering numbers, press to cancel.
While copying, press to stop copying.
i } } } } ,
i i
P.16 "Manual Feed