Ricoh Aficio SPC220N Hardware Manual page 97

Status
The backs of printed sheets are
blemished.
If rubbed with your finger, it
smears out.
The toner has run out and print-
ing has stopped.
The toner is powdery and comes
away from the paper, or the
printed image has a matt ap-
pearance.
If the problem cannot be solved, contact your sales or service representative.
Possible Causes, Descriptions, and Solutions
• When removing a jammed sheet, the inside of the printer
may have become dirtied. Print several sheets until they
come out clean.
• If document size is larger than paper size, e.g. A4 docu-
ment on B5 paper, the back of the next printed sheet may
be dirtied.
The setting of the paper may not be correct. For example, al-
though thick paper is used, the setting for thick paper may
not be set.
• Check the paper settings of this printer.
See p.26 "Types of Paper and Other Media".
• Check the paper settings of the printer driver.
See the printer driver Help.
When the toner runs out, pressing the {Stop/Start} key allows
you to print a few more pages, but the print quality of those
pages cannot be guaranteed.
Check if the fusing unit lever is lowered or the grey knobs are
positioned as in the image below.
ASH129S
Other Printing Problems
7
87