User Calibration - Raymarine Verado Installation And Commissioning Manual

40
Available Data Pages
Wind Speed
Depth Metres*
Depth Feet*
Depth Fathoms*
Heading
Water Temperature, Degrees C*
Water Temperature, Degrees F*
Course Over Ground
Speed Over Ground, Knots
Cross Track Error
Distance to Waypoint
Bearing to Waypoint
Rudder Gain
Response
Watch
Universal Time Coordinated
NOT USED
Note: There are 3 depth pages (meters, feet and fathoms) and 2 water temperature pages (°C and °F).
The SmartPilot will display the water temperature or depth data in the units defined by data page you
select.

User calibration

The User Calibration group includes settings that you may need to adjust on a regular basis
due to changing conditions. The User Calibration options (AUTO TACK, GYBE STOP, WIND
TYPE, WIND TRIM and RESPONSE) are also available via Dealer Calibration. The
Controller Operating Guide
SmartPilot Verado Installation and Commissioning Guide
Displayed as
WIND KTS
DEPTH M
DEPTH FT
DEPTH FA
HEADING
WATER °C
WATER °F
COG
SOG KTS
XTE
DTW
BTW
RUDD GAIN
RESPONSE
WATCH - used to control the Watch timer
UTC
Page not displayed
(Any data page set to NOT USED is not displayed
when you scroll through the data pages during
normal operation)
contains specific User Calibration instructions.
SmartPilot