Accessing The Calibration Modes - Raymarine Verado Installation And Commissioning Manual

SmartPilot Verado Installation and Commissioning Guide

Accessing the calibration modes

Calibration modes
Accessing
Calibration Modes
Calibration
Modes
You can only access the calibration modes from Standby:
1. With the SmartPilot in Standby mode, press and hold the standby key for 2 seconds. The
display will change to show DISPLAY CAL.
2. Press the disp key to scroll through the 4 calibration groupings:
• Display Calibration (DISPLAY CAL)
• User Calibration (USER CAL)
• Seatrial Calibration (SEATRIAL CAL)
• Dealer Calibration (DEALER CAL)
You can go backwards through the groups by pressing and holding the disp key for one second.
Note:
3. When you reach the Calibration group you want to access, press auto to enter that group.
2 seconds
2 seconds
(saves changes)
to enter display
calibration mode
to enter user
calibration mode
to enter seatrial
calibration mode
CAL ?
to enter dealer
+
calibration mode
37