Autopilot Calibration; Diagnostics; Diagnostics (See Diagnostics On Page 12) - Raymarine ST70 User Reference Manual

12
Display Response
The response setting determines the rate at which data readings update. You can
adjust the response at each pilot head to best suit the conditions under which you are
operating. You can independently adjust the response at each pilot head for individual
data types:
• Speed
• Depth
• Heading
• Wind Speed
• Wind Angle
•
1. Use < and > to scroll to the Response box and
ENTER
press
2. Use < and > to scroll to the response parameter
you want to change.
3. Use < and > to increase or decrease the setting
as required, from 1 to 15, where 1 is slow and 15
is fast. You may have to experiment to find out
the appropriate response level for your vessel.
ENTER
4. Press
CANCEL
or

Autopilot calibration

Refer to the ST70 Autopilot Controller/SmartPilot X Commissioning Instructions.

Diagnostics

Use < and > to scroll to the Diagnostics box and press
.
to accept the new value and exit,
to exit without making any change.
ST70 Pilot Controller Reference Guide
Display Settings
Response
Select display response.
i
Press ENTER to select.
Response
Press ENTER to select.
Speed
< & > adjust response level.
i
CANCEL exits without saving.
Press ENTER to accept.
ENTER
.
Speed
12