Install Automatic Upgrade Kit 15V256
Install Automatic Upgrade Kit 15V256
Use this kit to upgrade a ProMix 2KS manual system to
an automatic system.
15V256 Kit Parts
Ref.
No.
Part No. Description
1
15V825 KIT, board, discrete I/O; includes 2,
3, and 4
2
n/a
SUPPORT, board
3
n/a
CONNECTOR, plug, 6 position
4
n/a
CONNECTOR, plug, 8 position
5
n/a
HARNESS, wire
6
n/a
BOARD, automatic key
7
n/a
SCREW, machine, pan-hd; 4-40 x
1-1/2 in. (38 mm)
Parts labeled n/a are not available separately.
Before Installation
•
To avoid electric shock, turn off EasyKey power
before servicing.
•
Servicing EasyKey exposes you to high voltage.
Shut off power at main circuit breaker before open-
ing enclosure.
•
All electrical wiring must be done by a qualified
electrician and comply with all local codes and reg-
ulations.
•
Do not substitute or modify system components as
this may impair intrinsic safety.
•
Read Warnings, page 10.
NOTICE
To avoid damaging circuit board when servicing, wear
grounding strap on wrist and ground appropriately.
38
Install the Auto Key Board
1. Shut off ProMix 2KS power (0 position). F
Also shut off power at main circuit breaker.
Qty
1
4
2
2
1
1
1
F
. 24: Power Off
IG
2. Unlock and open EasyKey door with its key.
3. Locate the display board (C). F
4. Remove one screw (E) from the display board
assembly. F
IG
5. Align connector J4 on the underside of the auto key
board (6) with J3 on the display board. Press them
together. F
IG
6. Secure the auto key board (6) with the screw (7).
. 26.
IG
. 25.
. 26.
. 24.
IG
0 = OFF
TI12657a
312778G