Gps Setup - Raymarine hsb2 Owner's Handbook Manual

6-8

6.6 GPS Setup

GPS set up page provides you with information and the status of the tracked
navigation satellites for a SeaTalk GPS. It also enables you to SET UP a SeaTalk
Differential GPS, by manually retuning it to a different differential beacon.
Note: The satellite information is not available when you use an NMEA GPS.
➤ To select GPS Set Up:
1. Press MENU, then press the GPS SETUP... soft key.
MENU
The Navigation Status pop-up window shown in Figure 6-4. This window
provides, for each tracked satellite, the satellite number, its signal strength,
azimuth angle and elevation angle from your vessel.
Figure 6-4:
➤ To tune a differential SeaTalk GPS to another beacon:
1. Press D-GPS SETUP, the Differential GPS Setup pop-up is displayed with
MODE and BEACON SELECT soft keys.
2. Press MODE AUTO MAN to toggle the GPS to manual tuning.
3. Press BEACON SELECT, use the soft keys to set the required beacon fre-
quency and bit rate.
The status of the selected beacon is displayed in the pop-up.
Press ENTER to select the beacon and return to the Navigation Status win-
dow, then ENTER to return to the MENU soft keys.
Note: Under normal circumstances RESTART GPS is not required.
NAVIGATION STATUS
1
Navigation Status Window
HSB Series Color LCD Display
FIX
D4281-1