Transferring Waypoints And Routes - Raymarine hsb2 Owner's Handbook Manual

5-28
1. Move the cursor over any waypoint or leg in the current route, then press
the STOP GOTO/FOLLOW soft key.
The dotted line from your vessel to the target waypoint disappears.
If you subsequently use the FOLLOW ROUTE soft key to restart navigation, the
route is followed from the point at which it was stopped. This is indicated by a
square around the target waypoint. If you want to follow from another
waypoint you can initiate the follow then use the WAYPOINT ADVANCE or
FOLLOW FROM HERE soft key to step through the route.

5.6 Transferring Waypoints and Routes

Displayed SeaTalk Waypoints
In an integrated system, when a route is made current on any SeaTalk
equipment it is sent to all SeaTalk instruments, including this chartplotter; this
route will override any other current route. When GOTO waypoint or GOTO
cursor is in operation it is considered a route.
The current route can be edited on any instrument with route edit capability.
Note: Transferred waypoints are not automatically saved by the chartplotter,
however you can save the route locally, thus adding the waypoints to the local
waypoint list.
Managing Database Lists
There are three methods of maintaining database lists. The method you choose
will depend on the links available (SeaTalk, NMEA or HSB), and whether you
want to transfer individual waypoints or the complete waypoint and route list:
• If waypoints are transmitted by other equipment on SeaTalk or NMEA,
you can receive them on the chartplotter.
When this option is selected, any waypoints sent on SeaTalk or NMEA are
transferred and appended, one-by-one, to the waypoint list; routes sent on
NMEA are appended to the route list.
You can use this function to add waypoints from a PC connected via
NMEA.
• You can send the waypoint and route lists from the chartplotter to other
instruments via NMEA using the SEND WPT LIST function.
Sending the waypoint list does not affect current routes.
The NMEA link could be to a PC.
• You can transfer the waypoint and route lists from one chartplotter to
another across an HSB link using COPY WPTS FROM HSB.
HSB Series Color LCD Display