Table of Contents
Advertisement
2.3.2 NiCad Battery Pack
Although some voltage may be measured on the NiCad battery pack initially, it must be fully
charged before normal use. Remove the battery pack from the poly bag, and attach it to the
radio housing. Using a coin or screwdriver, turn the screw at the base of the NiCad battery
pack clockwise to secure the battery to the radio housing.
Installing the NiCad Battery Pack
2.3.3 NiCad Battery Charger
The NiCad battery charger can be used as a desktop charger, or can be wall mounted in a
convenient location. To attach the battery charger to a wall or other vertical surface:
1) Remove the two screws from the base of the charger.
2) Remove the wall mounting plate, and attach it to the wall using the screws provided.
3) Reassemble the charger by sliding the charger body down into the wall mounting plate.
4) Replace the two screws in to the base of the wall mounted charger.
Wall Mounting the NiCad Battery Charger
Advertisement
Table of Contents
