All Seek And Memory Seek Modes; Monitor Mode (Dual Watch/Tri-Watch) - Raymarine Ray 106 User Manual

2) Memory Scan
To scan only the channels that have been stored to memory, press the MEM key and
then press the SCAN key while "MEM" is blinking (within 2 seconds).

3.3.6 All Seek and Memory Seek Modes

1) All Seek
Press and hold the SCAN/SEEK key for 1 second, to activate the All Seek mode. The
SEEK indicator will appear on the display and the RAY106 will seek through all of the
channels in the selected frequency mode, stopping for 7 seconds on any channel with
traffic.
If a signal is received, the seek function will stop temporarily, but will resume after 7
seconds regardless of whether or not the station has cleared. To cancel the SEEK
mode, press the SEEK key.
If the SEEK mode has found a channel with traffic, and you wish to communicate with
the other party, press the PTT switch to cancel the SEEK mode and remain on that
channel.
2) Memory Seek
To seek only the channels that have been stored to memory, press the MEM key and
then press the SEEK key while "MEM" is blinking (within 2 seconds).
3.3.7 Monitor Mode
The monitor mode consists of the Dual Watch and Tri-Watch functions.
1) Dual Watch Mode
To start the Dual Watch mode, select the desired working channel and press the MON key.
The MON indicator will appear on the display, and the working channel and the 16plus
(priority) channel will be monitored. In the Dual Watch mode, the current channel being
monitored will be shown in the large LCD channel segments, and the channel in standby
mode will be shown in the small LCD channel segments.
2) Tri-Watch mode
To start the Tri-Watch mode, you must first be in the Dual Watch mode, then press the
MEM key. In addition to the two channels already being monitored, the last used WX
channel will also be monitored for severe weather alert broadcasts.
If a weather alert broadcast is detected, the RAY106 will emit an alarm and the WX
indicator will begin to blink. The Tri-Watch mode will then be canceled and the radio
will switch to the WX channel to monitor the severe weather broadcast.