Remote Fax Options (Not Available For Color Faxes); Fax Forwarding/Paging; Programming A Fax Forwarding Number; Programming Your Pager Number - Brother FAX-1800C Owner's Manual

Remote Fax Options
10
10
(Not Available for Color Faxes)

Fax Forwarding/Paging

You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF.

Programming a Fax Forwarding Number

When Fax Forwarding is set to ON, your fax machine stores the received fax in
memory. Then it dials the fax number you've programmed and forwards the fax
message.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
or
FAX FORWARD?, and then press
Menu/Set.
3
The LCD prompts you to enter the fax
number where faxes will be forwarded.
Enter the forwarding number (up to 20
digits), and then press Menu/Set.
4
Press Stop/Exit.

Programming Your Pager Number

When Paging is selected, your fax machine dials the pager number you've
programmed, and then dials your Personal Identification Number (PIN); this
activates your pager so you will know that you have a fax message in the
memory.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
or
PAGING?, and then press Menu/Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Menu/Set. Do not include the area code
if it is the same as that of your fax machine.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X E S )
1.FAX FWD/PAGING
FWD#:
1.FAX FWD/PAGING
PAG#:
10 - 1