Chapter 7: Manage Dell Hba355I Adapter, Dell Hba355I Front, Dell Hba355E Adapter, Dell Hba350I Mx, Dell Hba350I Adapter, And Dell Hba350I Mm Using Hii Configuration Utility; Enter The Hii Configuration Utility - Dell HBA 355 Series User Manual

Host bus adapter
Table of Contents

Advertisement

Manage Dell HBA355i Adapter, Dell HBA355i
Front, Dell HBA355e Adapter, Dell HBA350i
MX, Dell HBA350i Adapter, and Dell HBA350i
The Human Interface Infrastructure (HII) configuration utility is a storage management application integrated into the System
BIOS <F2>. It is used to manage physical disks. This utility is independent of the operating system. The HII configuration utility
is a standardized way of viewing and setting device configuration. The HII configuration utility provides pre-operating system
functionality and management for the following:
● Viewing physical device properties.
● Running physical device operations.
● Retrieving debug information.
Topics:

Enter the HII configuration utility

Exit the HII configuration utility
Navigate to the configuration utility
Controller management
Enter the HII configuration utility
About this task
Perform the following steps to boot to the HII configuration utility:
Steps
1. To view System Setup, power on the system, press F2, and click System Setup Main Menu.
The System Setup Main Menu screen details are described as follows:
Table 6. System setup menu 
Option
System BIOS
iDRAC Settings
Device Settings
2. Click Device Settings.
To access the management menu for the controller, use the arrow keys or the mouse.
NOTE:
For more information these options, click Help on the upper-right corner of the browser screen.
Manage Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter,
MM using HII configuration utility
Description
Configure BIOS settings.
The iDRAC settings utility is an interface that is used
to set up and configure the iDRAC parameters by using
Unified Extensible Firmware Interface (UEFI). You can
enable or disable various iDRAC parameters by using the
iDRAC settings utility. For more information about this
utility, see the iDRAC user's guide at
poweredgemanuals
Configure device settings for devices such as storage
controllers and network cards.
and Dell HBA350i MM using HII configuration utility
7
https://www.dell.com/
45

Advertisement

Table of Contents
loading

Table of Contents