Seatalkhs Network Switch Connection Tests; Setting Up The Nmea For Ais Or Navtex; Instrument Data Tests - Raymarine E120W Installation Manual

44
hs
SeaTalk network switch connection tests
To ensure that your SeaTalk
following:
• The Switch should display a static green light (right) and a flashing green light (left)
for each connecting port. If your switch is only displaying a left flashing light, data
will be transferred but the connection will be at low speed.
• Open a radar, chart and fishfinder application window on all display units and
check that the appropriate data is displayed throughout the network.
If you are not receiving any data, check the cable connections to the rear of the display
and the SeaTalk
Services (see

Setting up the NMEA for AIS or Navtex

If you have a Navtex or AIS receiver attached to the NMEA 0183 port, you will need to
change the NMEA Port Setting. This feature is accessed via the System Setup Menu/
System Integration Setup Menu.
You can connect either AIS or Navtex or other instrument to one display. In multiple
display systems each display can be configured independently and all data will be
shared across the system.
Connected to equipment
to NMEA port
General NMEA instruments
Navtex receiver
AIS receiver

Instrument data tests

To ensure that your system is receiving instrument data, you should check the
following:
From SeaTalk or SeaTalk
Open the instrument application and ensure all relevant data is displayed. If you are
not receiving data, check cable connections.
From third party devices on NMEA 0183
Check that appropriate NMEA sentences are being sent from the third party device and
on the E-Series Display. Open the instrument application and ensure all relevant data is
displayed.
hs
network switch is connected, you should check the
hs
Switch. If the problem persists, please contact Raymarine Technical
page 50
).
Setting
NMEA 4800
Navtex 4800
Navtex 9600
Navtex 38400
2
E-Series Installation Manual
Additional information
Default setting
Please refer to your Navtex receiver manual
for details of the appropriate setting.