Raymarine E120W Installation Manual page 33

Chapter 3: Installation
The cable connections are located on the back of the display unit. All cables can be
connected prior to mounting the unit on the trunnion bracket. Please read the details
relating to each cable before connecting them.
E-Series cable connections
Radar
For details of what is connected to each of these cables please refer to the diagrams on
Note:
page 15, page 17 and page 18.
How do I use the cable splicers?
The cable splicers are used to make the connections from the SeaTalk/Alarm out and
NMEA 0183 cables easy and secure, without removing insulation from cable tails.
Do not use cable splicers on any cables other than SeaTalk/Alarm out and NMEA 0183.
Note:
To use these connectors:
1. Place the wires to be joined into the connectors, ensuring correct polarity and that
the wires are pushed fully home.
Supplied
Not supplied/accessory
Power
HS
SeaTalk
2
NMEA SeaTalk/ SeaTalk
0183 Alarm out
27
VGA out
Video in