Raymarine E120W Installation Manual page 40

34
...for new installations
The array and the display should be connected using the split pedestal cable as shown:
Part No
E55063
E55064
Split pedestal cable
(15 or 25 metres)
Split pedestal cable
To display
Note: You should ensure that the distance (cable route) from the power supply to the
open array is kept to a minimum.
Description
15m Split pedestal cable
25m Split pedestal cable
Open Array
Power to open array
Boats DC
Power Supply
E-Series Installation Manual
Power to display
Note: The power supply for both the display
and the open array must be of the same
voltage (using a convertor if necessary) and
from a common supply source e.g. the same
battery or power breaker.
To power
E-Series Display
PAGE
ACTIVE
WPTS
MOB
DATA
MENU
OUT
RANGE
IN
OK CANCEL
D7329-1
To Open
Array Scanner
D7209-1