Raymarine E120W Installation Manual page 28

22
i. Locate the front cover clip-on over the front of the display - see
ii. Check that the buttons have passed through the cover and are free to operate.
It is suggested that you use your thumb or forefinger in a circular motion to do
this.
5. Attach the display unit into the trunnion bracket, adjusting the unit to the required
angle for clear vision.
6. Tighten the trunnion knobs.
Trunnion mounted display
Front cover clip-on
Trunnion knob (x 2)
Trunnion bracket
Bolt - M6 x 50mm
(x 5)
Washer
(x5)
Button
washer (x5)
Nyloc (x5)
E-Series Installation Manual
page 24
.
E-series display unit
D7211_1