Network Connection - Raymarine axiom 7 Installation Instructions Manual

4.5 Network connection

Your MFD can be directly connected to a compatible product using the RayNet network connection.
Your MFD can also be connected to a network of products when using a suitable network switch.
1. MFD
2. RayNet to RayNet cable — Connect one end of the RayNet cable to your MFD and the opposite
end to a RayNet device or RayNet network switch.
3. RayNet to RJ45 cable — Connect the RayNet end of the cable to your MFD and the opposite
end to a RJ45 device or RJ45 network switch.
4. Compatible network device, such as a Network switch, Radar scanner, Sonar module, IP camera
etc.
Note:
Refer to the instructions supplied with your network product for specific connection information.
Connections 49