Chapter 3: Graphical Data; Compass Bar; Turning The Compass Bar On And Off - Raymarine C120 New Features Manual

Chapter 3: Graphical Data

Chapter 3: Graphical Data
The C-Series now gives you the option to display some navigation and engine data
graphically. You can configure the unit to display a compass bar, and to show
additional engine and genset (engine-driven electricity generator) data.

3.1 Compass bar

The compass bar gives you a continuous readout centred on your current heading or
course over ground (COG). Arrows at either end of the bar indicate current steer
direction.
• In heading mode, the bearing marker is RED.
• In COG mode, the bearing marker is GREEN.
• When you use the compass bar with an active waypoint, the bearing marker is
BLUE and the active waypoint symbol indicates the bearing to your waypoint.

Turning the compass bar on and off

You turn the compass bar on and off from the data toolbar.
• Press the DATA button.
Use the DATABAR softkey to turn the compass bar on or off.
Table 3-1:
ON
COMPASS
OFF
Active waypoint
Bearing marker
DATABAR Softkey Options
Displays the standard databar, at the top or side of the
screen depending on your setup options.
Replaces the standard databar with the compass bar,
displayed along the top of the screen.
Removes both the databar and the compass bar from your
display.
Steer direction
7