Service And Adjustments - Gravely 992224 Owner's/Operator's Manual

Table of Contents

Advertisement

Gravely Dealers will provide any service which
may be required to keep your unit operating at
peak efficiency. Should engine service be
required, it can be obtained from a Gravely
Dealer or the engine manufacturer's
authorized service center.
WARNING: AVOID INJURY. Read
and understand entire Safety
section before proceeding.
CAUTION: HOT SURFACES may
result in injury. DO NOT touch
engine or drive parts which are hot
from operation. Allow parts to cool
before servicing.
SERVICE POSITION
(Figure 10)
1. Place unit on a flat level surface.
ALWAYS stop engine. Ensure unit is
secure and chock wheels. Strap and
clamp onto lift if used.
2. Place steering levers in neutral position
and engage parking brake.
3. Release the seat latch and tip seat
forward (Figure 10).
4. When service is complete, return seat to
operating position.
5. Ensure that seat latch if fully engaged
before operating unit.
CAUTION: Avoid Injury! Seat
assembly is heavy. Be sure footing
is secure to accomodate weight
shift of seat when rotating it into
service position.
Use care when returning seat to
operating position to avoid
pinching hands or fingers under
seat plate.

SERVICE AND ADJUSTMENTS

1. Seat Latch
2. Service Position
CHECK ENGINE OIL
The engine crankcase oil should be checked
every 5 hours of operation. Oil level MUST be
maintained in safe operating range on
dipstick at all times or engine damage will
result. See engine manual for correct oil level.
Park unit on a level surface. Refer to engine
manual for detailed instructions.
CHANGE ENGINE OIL
Change oil per engine manufacturer's
recommendations. Refer to Engine Manual
for detailed instructions.
Run engine just prior to changing oil. Warm
oil will flow more freely and carry away more
contamination. Remove the oil drain plug
from the rear of the unit and tip the unit back
to help drain all the oil.
NOTICE: To drain the oil, use the oil drain
hose supplied with unit, not the drain plug
that is shown in the engine manual.
EN - 26
Figure 10
1
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents