Graphics Subsystem; Integrated Graphics Subsystem; Introduction - HP Compaq dx6100 Series Technical Reference Manual

Hide thumbs Also See for Compaq dx6100 Series:
Table of Contents

Advertisement

6.1

Introduction

This chapter describes graphics subsystem that is integrated into the 82915G/GV GMCH
component. This graphics subsystem employs the use of system memory to provide efficient,
economical 2D and 3D performance.
The SFF, ST, MT, and CMT form factors may be upgraded by installing a graphics card into the
PCI Express x16 or the PCI 2.3 slot. The USDT form factor may be upgraded by installing
graphics card into the PCI 2.3 slot. An installed PCI Express or PCI 2.3 graphics controller card
will be detected by the BIOS during the boot sequence and the integrated graphics controller of
the 82915G GMCH will then be disabled (refer to section 6.5 for more information on upgrading
the graphics subsystem).
This chapter covers the following subjects:
Functional description (6.2), page 6-2
Display Modes (6.3), page 6-5
Upgrading graphics (6.4) , page 6-5
VGA Monitor connector (6.5), page 6-6
Technical Reference Guide

Integrated Graphics Subsystem

361834-001
6
6-1

Advertisement

Table of Contents
loading

Table of Contents