System Support; Introduction; Pci Bus Overview - HP Compaq dx6100 Series Technical Reference Manual

4.1

Introduction

This chapter covers subjects dealing with basic system architecture and covers the following
topics:
PCI bus overview (4.2), page 4-1
System resources (4.3), page 4-11
Real-time clock and configuration memory (4.4), page 4-19
System management (4.5), page 4-21
Register map and miscellaneous functions (4.6), page 4-26
This chapter covers functions provided by off-the-shelf chipsets and therefore describes only
basic aspects of these functions as well as information unique to the systems covered in this
guide. For detailed information on specific components, refer to the applicable manufacturer's
documentation.

4.2 PCI Bus Overview

This section describes the PCI bus in general and highlights bus implementation in this particular
system. For detailed information regarding PCI bus operation, refer to the appropriate PCI
specification or the PCI web site: www.pcisig.com.
These systems implement the following types of PCI buses:
PCI 2.3 - Legacy parallel interface operating at 33-MHz
PCI Express - High-performance interface capable of using multiple TX/RX high-speed
lanes of serial data streams
The PCI bus handles address/data transfers through the identification of devices and functions on
the bus. A device is typically defined as a component or slot that resides on the PCI bus (although
some components such as the GMCH and ICH6 are organized as multiple devices). A function is
defined as the end source or target of the bus transaction. A device may contain one or more
functions. In the standard configuration these systems use a hierarchy of three PCI buses (Figure
4-1). The PCI bus #0 is internal to the chipset components and is not physically accessible. The
Direct Media Interface (DMI) links the GMCH and ICH6 components and operates as a subset of
the PCI bus. All PCI slots and the NIC function internal to the ICH6 reside on PCI bus #2.
Technical Reference Guide

System Support

361834-001
4
4-1