Connecting The Fluidmesh Cisco Fm4200 Mobi To A Network And Antennas; Terminal Assignments For Power And Data Connectors; M12 A-Coded; M12 A-Coded (Five-Pin) - Cisco FLUIDMESH FM4200 Mobi Installation And Configuration Manual

Cisco Ultra-Reliable Wireless Backhaul FM4200 Mobi
5.2. Connecting the Fluidmesh Cisco FM4200 Mobi to a
network and antennas

5.2.1. Terminal assignments for power and data connectors

M12 A-coded

This section describes the terminal assignments for M12 A-coded
connectors equipped with five pins (power only) and with eight pins
(power and data).

M12 A-coded (five-pin)

The terminal assignments for female M12 A-coded five-pin connectors are
as follows:
Terminal 1: V1+ (Brown wire)
Terminal 2: Not used
Terminal 3: V1- (Blue wire)
Terminal 4: Not used
Terminal 5: Ground / Earth (Gray wire)
© 2020 Cisco and/or its affiliates. All rights reserved.
IMPORTANT
Always use outdoor-rated, RF-shielded Ethernet cables when
connecting the Power and LAN ports of a Fluidmesh hardware
device to external hardware.
Page 34 of 177