Table of Contents
Advertisement
■ Defroster Control
The following procedure is available when a selected
camera (housing) is equipped with a defroster.
1. Select the desired monitor and camera. (Refer to
p. 39 Monitor Selection and Camera Selection.)
2. Pressing the DEF ON/OFF button.
The defroster will be activated.
MON Def On
0123 Unit:01
3. To deactivate the defroster, press the DEF ON/OFF
button while holding down the SHIFT button.
MON Def Off
0123 Unit:01
Note:
• The defroster will be automatically deactivated
when the temperature reaches the specified
degrees.
■ Auxiliary Control
You can control one or two auxiliary control devices.
The following procedure is available when an auxiliary
control device, such as Receiver WV-RC150, is con-
nected to a system unit.
● Operating Procedure
CAM
00512
CAM
00512
1. Select the desired monitor and camera. (Refer to
p. 39 Monitor Selection and Camera Selection.)
2. Press the AUX 1 ON/OFF or AUX 2 ON/OFF but-
ton.
The auxiliary control device, associated by the
installation wiring, will be activated.
MON Aux1 On
0123 Unit:01
MON Aux2 On
0123 Unit:01
3. To quit the auxiliary control, press the AUX 1 ON/
OFF or AUX 2 ON/OFF button while holding down
the SHIFT button.
MON Aux1 Off
0123 Unit:01
MON Aux2 Off
0123 Unit:01
CAM
00512
CAM
00512
CAM
00512
CAM
00512
43
Advertisement
Table of Contents
