Kohler KDI 2504TM Owner's Manual page 26

Hide thumbs Also See for KDI 2504TM:
Table of Contents

Advertisement

5
5.8 Check coolant level
NOTE:
Before proceeding with any operation on
the engine, stop it and allow it to cool.
• Presence of steam pressurized coolant danger of burns.
NOTE:
Component not necessarily supplied by
KOHLER.
1. Start the engine without the radiator cap A.
2. Top liquid up until the pipes inside the radiator are covered
by about 5 mm.
3. Top up if necessary.
4. Do not overfill the radiator, but leave room for the coolant
to expand.
5. Reinstall radiator cap A.
6. For engines equipped with expansion tank (B), check that
the fluid is until reaching the max level mark.
NOTE:
For coolant filling see
• Before starting make sure that the radiator cap and cap, if
present, are installed correctly to avoid spillage of liquid or
vapour at high temperatures.
EN
26
INFORMATION ABOUT MAINTENANCE
Warning
Par.
4.6.
Warning
A
5.8
5.9
B
MAX
C
_07
ED0053030260
_08
Index

Advertisement

Table of Contents
loading

Table of Contents