Table of Contents
Advertisement
Replacing backup lamp bulbs (Sedan)
1. Make sure the headlamp switch is in the off position.
2014 Police (pol)
Owners Guide gf, 2nd Printing, September 2013
USA (fus)
Maintenance
4. Remove the bulb socket by
rotating it counterclockwise, then
pulling it out of the lamp assembly.
5. Pull the bulb straight from the
socket.
Install new bulb(s) in reverse order.
2. Remove the deck lid trim panel press pins
and carefully pull the panel away to expose
the backside of the backup lamp assembly.
3. Remove bulb socket by rotating it
counterclockwise, then pull it out of
the lamp assembly.
243
Advertisement
Table of Contents
