Lutcontrol - Omron GigE Vision STC-BBS1242POE-BC Product Specifications And User's Manual

Name
GainAutoBalance
GainBalanceSelector
GainBalanceRatioRaw
[GainBalanceSelector]
GainBalanceRatioPresetRaw
[GainBalanceSelector]
11.5

LUTControl

Name
LUTSelector
LUTEnable [LUTSelector]
LUTIndex [LUTSelector]
LUTValue [LUTSelector] [LUTIndex]
LUTValueAll [LUTSelector]
PixelCorrectionAllEnabled
PixelCorrectionIndex
PixelCorrectionEnabled
[PixelCorrectionIndex]
PixelCorrectionX [PixelCorrectionIndex]
PixelCorrectionY [PixelCorrectionIndex]
STC-BxS1242POE-BC / STC-BxS1242GE-BC
Product Specifications and User's Guide
Description
Sets the mode for automatic gain balancing between the sensor color
channels or taps. The gain coefficients of each channel or tap are
adjusted so they are matched. (STC-BBS1242xx)
Selects the position for gain balance. (STC-BBS1242xx)
Determine value of targeted position for gain balance.
(STC-BBS1242xx)
Preset gain for manual gain balance. (STC-BBS1242xx)
Description
Selects which LUT to control.
Activates the selected LUT.
Control the index (offset) of the coefficient to access in the selected
LUT.
Returns the Value at entry LUT Index of the LUT selected by LUT
Selector.
Accesses all the LUT coefficients in a single access without using
individual LUT Index.
Enable pixel correction for all pixels.
Determine index of targeted pixel for pixel correction.
Determine if targeted pixel is enabled for pixel correction.
Determine x-coordinate of targeted pixel for pixel correction.
Determine y-coordinate of targeted pixel for pixel correction.
No.21S075-01
64/73