Thread Color Blocks; Number Of Stitches In Current Color Block; Return To Embroidery Edit; Step Stitch-By-Stitch/Go To Stitch - Singer SE9150 Instruction Manual

Thread Color Blocks

All colors in the loaded design(s) are shown in the order they
will be embroidered with thread color blocks.
Touch the Color List to view a full list of all colors used in the
design. Each listed color shows the thread color number and
the color block order. Touch the arrows in the color list to see
all of the color blocks.
Open the go to stitch / color change to activate the next or pre-
vious color block in the color block list by touching a different
color block.

Number of Stitches in Current Color Block

The current stitch position in the current color block is shown
next to the color block icon. The numbers on the right shows
the total number of stitches in the current color block.

Return To Embroidery Edit

Touch this icon to return to Embroidery Edit if you want to
make adjustments to your design(s). A pop-up message will
appear asking if you want to return to Embroidery Edit because
any changes made in Embroidery Stitch-Out will be lost.

Step Stitch-by-Stitch/Go to Stitch

Touch + to step forward and - to step backwards stitch by
stitch. Move backwards a few stitches, e.g. after the upper
thread breaks or runs out, to ensure that the thread will be se-
cured. Touch & hold to move through the stitches more rapidly.
The cursor on the screen will follow the stitches in the embroi-
dery area.
To go to a particular stitch within the color block, touch the
go to stitch button and enter the stitch number. If the number
entered is too large, the machine will move to the last stitch in
the current color block.
Embroidery Stitch Out – 5 3