WIFI & MYSEWNET SERVICES
Only for models SE9180 and SE9185
WiFi Introduction
Your machine features WiFi which makes it possible to connect
your machine wirelessly to the mySewnet services. Follow the
steps below to connect your machine.
Getting Started With WiFi
Touch the mySewnet button in the top bar, and then the settings
button in the top corner or bottom corner of the screen. Select
mySewnet
Information
from the list of available networks. If your network is password
protected, you will be prompted to enter the password to con-
nect. Touch the information icon to open an information pop-up
about the network. You can also see the signal strength and
if the network is password protected, indicated with a closed
padlock.
Other Network
Touch the button to connect to another network. A pop-up will
be shown on the screen where you can enter the name of the
other network.
Firmware Update Using WiFi
To be able to get the latest firmware wirelessly you need to
connect to a network using WiFi. When connected, your ma-
chine will automatically search for available firmware update.
If the machine has detected that there is a newer firmware
available, the firmware update button will be visible in the
mySewnet settings. Touch the button to download and install
the latest firmware.
Restart the machine when the update is completed. Check the
firmware version number in the mySewnet settings.
Wifi & Mysewnet Services – 2 9