Honeywell Notifier INSPIRE E10 Installation Instructions Manual page 21

PSU 240W AND 480W
The DIN rail mounted single-phase-input power supply
provides a floating, stabilized and galvanically separated
SELV/PELV output voltage.
The output of this PSU is for internal use
and must not be used to power anything
else.
DC OK
PSU 240W
The PSU is an integral part of the panel, factory fitted
inside the backbox and internally wired.
Notifier INSPIRE E10/E15 Control Panels - Installation instructions
PSU 480W
Note the DC OK relay contact pins 13 and
14 on the PSU are not for general use.
PSU for Notifier INSPIRE
E10 Panel
Dimensions Height 124 x
in mm Width 49 x
Depth 124
Weight 540g
Mains input 230 V AC 50Hz
typical
Mains input 1.15 A
current
Output 36.5Vdc ±1.5% 36.5 V DC ±1.5%
Output 6.7 A < 55 ⁰C
current
DC-OK LED On - normal
Off - < 29 V
typical
Mounting
E15 Panel
Height 124
Width 59
Depth 127
(without
DIN-rail)
810 g
230 V AC 50Hz
typical
2.3 A
13.3 A < 55 ⁰C
On - normal
Off - < 29 V
typical
DIN rail
21