Honeywell Notifier INSPIRE E10 Installation Instructions Manual page 19

Battery current with mains disconnected is dependent on the system configuration and current during alarm.
†
Battery charging Current: 0.8 A (12 Ah), 1.6 A (24 Ah) and 2.5 A (38 Ah)
†
Battery end of discharge Voltage / Deep discharge protection : 21 V (U
†
Output Voltage at which the outputs are switched off: 24 V
†
Battery voltage
† at which outputs are switched off: 21 V
ENVIRONMENTAL
Climatic Classification: 3K5, (IEC 721-2-3)
†
Operating Temperature: -5 °C to +40 °C
†
Relative Humidity: 5 % to 95 % non-condensing
†
Height above sea level: 2000 m maximum
†
Panel Sealing: IP30 (EN60529)
†
EMC Emissions: EN61000-6-3 Residential, Commercial & Light Industry
†
Immunity: EN50130-4 Alarm systems: Electromagnetic compatibility
†
Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
Safety: EN 62368-1.
†
Notifier INSPIRE E10/E15 Control Panels - Installation instructions
)
batt min
19