Table of Contents
Advertisement
3.3 Data Management
•
Click CANCEL to return to the Upload of Firmware data (PC –> VoIP Gateway)
screen without starting up the card with the updated page.
5.
Switch the firmware status of the updated page from "NEW" to "Main Operation Mode".
After the previous step (with or without a reboot), the firmware status of the updated page
is still "NEW". To set the updated page as the active page on startup, you must change its
firmware status to "Main Operation Mode". For instructions, refer to "3.3.2 Handling of
Firmware Page".
The following is a sample image of the screen in which you can set the active page on
startup:
60
Programming Guide
Advertisement
Table of Contents
