Panasonic KX-TDA3480 Programming Manual page 30

2.2 Programming
Example 2
The following configuration is used to dedicate a single VoIP gateway port (2 channels) to
individual extension groups. Specifically, with this configuration, calls to extension group A are
routed through the port 1, and calls to extension group B are routed through the port 2.
This configuration rejects the third call to extension group A, while reserving the other port (the
other two channels) through which to route calls to extension group B.
Hunt Group
Hunt Group
Hunt Pattern Entry—1
Hunt Pattern No.
Receive Leading Number
Hunt Group (Priority1)
Hunt Group (Priority2)
Hunt Pattern Entry—2
Hunt Pattern No.
Receive Leading Number
Hunt Group (Priority1)
Hunt Group (Priority2)
Dials "950-101".
Dials "950-102".
Dials "950-103".
Dials "950-201".
Dials "950-202".
It is possible to programme the PBX to allocate a single VoIP gateway port to individual
extension groups A and B for making outgoing calls. With this programming, each extension
group A and B can have a port for its exclusive use.
• The VoIP gateway port the extension group A uses to make outgoing calls: port 1
• The VoIP gateway port the extension group B uses to make outgoing calls: port 2
30 Programming Guide
Port 1
Hunt Group 1
1
9501
1
-
2
9502
2
-
PBX (PBX Code: 950)
VoIP Gateway Card
IP Network
Port 2
Hunt Group 2
Port 1
Extn. Group A
Channel 1
Channel 2
Extn. 101 ... Extn. 199
Port 2
Extn. Group B
Channel 1
Channel 2
Extn. 201 ... Extn. 299