Table of Contents
Advertisement
Parameter Descriptions
The parameters indicated with "#" must be changed while the card is in the "STOP" status (see "2.3.1
Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot").
IP Address Settings
Parameter & Description
#
IP Address
Specifies the IP address of the card.
For more information, consult your network
administrator.
#
Subnet Mask
Specifies the subnet mask address of the card.
For more information, consult your network
administrator.
#
Default Gateway
Specifies the default gateway IP address of the card.
For more information, consult your network
administrator.
DHCP Settings
Parameter & Description
#
DHCP Server
Specifies the use of a DHCP server.
For details, refer to "Detailed Explanations".
#
DHCP Server Port No.
Specifies the port number for DHCP communications
by the DHCP server.
Generally, there is no need to change the default value.
#
DHCP Client Port No.
Specifies the port number for DHCP communications
by the card (the DHCP client).
Generally, there is no need to change the default value.
#
DHCP Lease Time (min) 1-1440 min
This parameter is provided for engineer use only.
Default
Value Range
192.168.1.200
The following addresses
are invalid:
•
•
•
•
255.255.255.0
Any address is valid.
0.0.0.0
Same as the parameter
IP Address, except that
the address 0.0.0.0. is
allowed.
Default
Value Range
Don't use
Use,
Don't use
67
1 to 65535
68
1 to 65535
1440
0 (disable),
1 to 1440
2.2 Programming
Class D addresses
Class E addresses
Loopback
addresses
Addresses with
host number all 0s
or 1s
Programming Guide
11
Advertisement
Table of Contents
