Siemens SIMATIC S7-1500 Manual page 15

SIMATIC Memory Card
You load the application-specific files into the TM NPU with the help of a SIMATIC Memory
Card. Examples of application-specific files include the files for the application and the neural
networks.
Use only the SIMATIC Memory Card specified below:
Article number
6ES7954‑8LPxx‑0AA0
Supported cameras
The cameras can be connected via the integrated USB interface or the Ethernet interface of
the TM NPU.
The following cameras are approved for the TM NPU:
• USB camera from Intel, type RealSense D435
NOTE
Use of a connected USB camera
Use the USB interface only for testing and commissioning purposes.
The USB camera Intel RealSense D435 is not suitable for productive operation.
For details on the USB interface, refer to section: Terminal assignment, section: USB 3.1
interface (Page 19).
• Gigabit Ethernet Vision cameras
You can find the list with an overview of the supported cameras on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109815405).
Accessories
The following accessories are supplied with the module and can also be ordered separately as
spare parts:
• Supply voltage connection plug
• U connector
• Universal front cover
You can find more information on accessories and the article numbers in the system manual
of the S7-1500, ET 200MP Automation System
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
Technology Module TM NPU
Equipment Manual, 07/2023, A5E46384784-AC
Capacity
2 GB
Product overview
3.2 Properties
15