Hot Desk Remote Logout; Tag Call - Mitel MiVOICE 5304 User Manual

Hot Desk Remote Logout

A user who has forgotten to log out of a Hot Desking phone can be logged out using any phone
that supports Hot Desk Remote Logout.
To remotely log out a Hot Desking phone:
1. Dial the appropriate feature access code.
2. Dial the Hot Desk User Extension Number that you want to log out.

Tag Call

Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the
tag, your system administrator or telephone company can identify the source of the call and
provide this information to appropriate personnel or authorities. CAUTION: Tagging a non–
malicious call may result in fines or other penalties.
To tag a malicious call:

Press the programmed Tag Call feature key while the call is in progress.
–OR–

Press the programmed Transfer/Conference key and dial the appropriate feature access
code.
If the call was successfully tagged "Thank You" is shown on the display; otherwise, "Not Allowed"
is displayed. Note: Tag Call can be used on active two–party calls only. Calls on hold and
conference calls cannot be tagged.
To delete a particular call from the call log:

With the call log that you want to delete displayed, press # twice.
MiVoice 5304 IP Phone User Guide
23