Operation; Power On And Self-Test; Setting Saver; Memory/Beep Confirmation - Whistler MAXIMUM PERFORMANCE User Manual

Power On and Self-Test

To turn the unit ON or OFF, gently press the center of the Power/
Volume button into the side of the unit.
Each time your Whistler detector is turned on, an automatic
self-test sequence confirms that the speaker, visual displays are
functional along with many of the saved settings.

Setting Saver

Stores your personalized settings so that when the detector
is turned off and then on again, you do not have to re-enter
them.

Memory/Beep Confirmation

All features selected (except Stay Alert and Quiet) are retained
in memory. Each time a button is pressed one beep confirms
feature "on", two beeps confirm feature "off".
Audio Level Adjustment
To change the audio level:
• Move Power/Volume button back to increase audio
level.
• Move Power/Volume button forward to decrease audio
level.
As audio level is adjusted, beeps are provided and the display
indicates volume level.

OPERATION

12