Operation; Power On And Self-Test; Feature Engaged Confirmation; Integrated Real Voice - Whistler 1655 Owner's Manual

INSTALLATION
Visor Mounting (optional accessory)
• Slide the visor bracket into the bracket mounting slot.
• Clip the visor bracket onto the visor making sure it is
relatively level and has a clear view of the road.
Slide on view
Insert into bracket mounting slot. Do not bend this
section of bracket.
Power Connection
• Plug the small end of the power cord into the unit's power
jack.
• Plug the large end into the vehicle's cigarette lighter.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 2
amp 3AG fuse located behind the silver tip. To replace the
fuse, carefully unscrew the tip of the plug. (IMPORTANT:
Unscrew slowly. The tip contains a spring which may fly out
when disassembling.) Insert the new fuse with the spring and
screw on the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp
fuse.
8

OPERATION

Power On And Self-Test

Each time your Whistler detector is turned on, an auto-
matic self-test sequence confirms that the speaker and
visual displays are functional.
• Turn Power/Volume control clockwise. Display shows:
X K PWR Alert
Ka

Feature Engaged Confirmation

Each time a button is pressed one beep confirms feature
"on", two beeps confirm feature "off".

Integrated Real Voice™

Real Voice ™ is used along with audio tones to articulate
band identification and Safety Warning System™
messages.
9
VG-2 City
X Band
K Band
Ka Band
Laser
Safety Radar