Alert Periscopes - Whistler MAXIMUM PERFORMANCE User Manual

OPERATION
In City Mode, weak speed/safety radar signals give an initial
alarm of two beeps, and then remain quiet until the signal
becomes very strong. When the signal strength increases, two
additional beeps are provided. City 1 and City 2 Modes operate
the same as Highway Mode, but in City 1 Mode, only the X band
is lowered. In City 2 Mode, X-band is not detected.
CAUTION: Some towns/small cities may still be using X band
radar. City Modes do not change the audio alert for laser.
Selectable Signal Strength Display
There are two settings available in Option Mode that
effect how a received radar signal strength is displayed.
The "RMP STD" (ramp standard) option uses our standard
signal progression from level 1 to 9. The "RMP FST" (ramp
fast) option increases the progression from level 1 to 9.
RMP FST increases the response of the signal strength
meter for all bands.
1 = weak signal, 9 = strong signal

Alert Periscopes

Whistler's Alert Periscopes provide an added attention getting
visual alert. The two extra LEDs flash on and off when the unit
alarms to provide a unique visual alert.
15