Table of Contents
Advertisement
TROUBLESHOOTING
Care and Maintenance
Do not spray water, cleaners or polishes directly onto the unit.
The spray may penetrate through the openings and damage
the unit. Also, do not use any abrasive cleaners on the unit's
exterior.
Troubleshooting
Your Whistler detector is expertly engineered and designed
to exacting quality standards to provide you with reliable,
trouble-free operation. If your unit has been correctly installed
following the guidelines in this manual, but is not operating
optimally, please refer to the troubleshooting guide below.
PROBLEM: No display or audio.
• Check fuse in power cable, replace if necessary.
• Check fuse in fuse box, replace if necessary.
PROBLEM: Unit alarms when vehicle equipment or electrical
accessories (brakes, power mirrors/windows, directionals,
horn, etc.)
• Check conditions of vehicle's electrical system, including
battery and alternator.
PROBLEM: Audio alerts are not loud enough.
• Cancel Auto Quiet Mode or City Mode.
• Check audio level setting.
32
Advertisement
Table of Contents
