Table of Contents
Advertisement
Available languages
Available languages
Table of Contents
myQ Serial Number ...................................... 2
Safety Symbol and Signal Word Review ...... 2
Unattended Operation ................................... 2
Planning ........................................................ 3
Preparing Your Garage Door ........................ 5
Tools Needed ................................................ 5
Carton Inventory ........................................... 6
Additional Items You May Need ................... 6
Garage Door Opener ..................................... 7
Garage Door Opener ..................................... 8
Garage Door Opener ..................................... 9
and Handle .................................................. 10
Preparation
myQ Serial Number
Write down the following information for future reference:
myQ Serial Number:
Product Serial Number:
Date of Purchase:
Safety Symbol and Signal Word Review
This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in
strict accordance with the instructions and warnings contained in this manual.
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of serious injury or death if you do not comply with the
warnings that accompany them. The hazard may come from something mechanical or
from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your garage door and/or the garage door opener if you do not comply with the
cautionary statements that accompany it. Read them carefully.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause
cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Unattended Operation
The Timer-to-Close (TTC) feature, the myQ Smartphone Control app, and myQ Garage Door and Gate Monitor are examples of
unattended close and are to be used ONLY with sectional doors. Any device or feature that allows the door to close without being in the
line of sight of the door is considered unattended close. The Timer-to-Close (TTC) feature, the myQ Smartphone Control, and any other
myQ devices are to be used ONLY with sectional doors.
myQ Remote LED Light must be installed to enable use of Timer To Close or myQ Smartphone Control of the door.
2
Install Automatic Door Lock ....................... 10
) ............................... 11
®
Install myQ Remote LED Light ................... 12
Install the Protector System ...................... 13
Connect Power ............................................ 16
Align the Safety Reversing Sensors ........... 17
Install the Battery Backup ........................... 18
Identify Door Profile .................................... 19
7
Set Door Profile ........................................... 20
Automatic Force Set Up .............................. 21
Test the Safety Reversal System ................ 22
Test the Protector System ......................... 22
8
Test the Power Door Lock .......................... 23
Test the Emergency Release ....................... 23
Using Your Garage Door Opener ................ 25
Connect with Your Smartphone ................. 26
Using the Door Control ............................... 27
2
893MAX Remote Control ............................ 29
Program the myQ Remote LED Light ......... 30
To Erase the Memory .................................. 30
.................................................. 31
®
Care of Your Garage Door Opener .............. 32
19
Diagnostic Chart .......................................... 33
Additional Troubleshooting ......................... 34
21
Installation Parts ......................................... 36
Garage Door Opener Assembly Parts ......... 37
24
Serial Numbers
Mechanical
29
32
33
36
37
38
39
40
Electrical
Advertisement
Chapters
Table of Contents
Troubleshooting
