Removal And Replacement Of Water Valve - Hoshizaki KM-1300SWH-E Service Manual

11. REMOVAL AND REPLACEMENT OF WATER VALVE

1) Turn off the power supply. If the unit is equipped with a plug, unplug it.
2) Close the Water Supply Line Shut-off Valve.
3) Remove the Top Panel and Front Panel.
4) Remove the Valve Outlet Tubing by releasing the Clamp.
5) Remove the Bracket from the unit.
6) Remove the Fitting Nut and Water Valve.
7) Disconnect the Terminals from the Water Valve.
8) Install the new Water Valve, and replace the removed parts in the reverse order of
which they were removed.
9) Open the Water Supply Line Shut-off Valve.
10) If the unit is equipped with a plug, plug it in. Turn on the power supply.
11) Check for leaks.
12) Replace the Top and Front Panels in their correct positions.
40