Setting A Delay Start - Baumatic BTM17.4SS Instruction Manual

Setting a delay start

This function will allow you to set a time in the future that the
microwave will switch on at.
o IMPORTANT: You must make sure that the clock is set to the
correct time before using this feature.
o IMPORTANT: It is not possible to set a delay start when using
automatic cooking, automatic defrost or quick start.
o IMPORTANT: You will need to leave the microwave door open
to access the control panel and set the required power level and
time.
o Set the power level and cooking time (as described previously in
this instruction manual).
o DO NOT press the instant start button (F) at this point,
otherwise the microwave will start cooking immediately.
o Press and hold down the preset clock button (C) until you hear a
brief audible signal.
o Press the time weight button (I) and the hour digits will start to
flash. Continue to press the time weight button until the hour
digit that you want the cooking to start at is displayed.
o Press the preset clock button again to confirm the hour time. The
minute digits will start to flash. Continue to press the time
weight button until the minute digit that you want the cooking to
start at is displayed.
o Press the preset clock button for a third time to confirm the time
of day that the microwave will start cooking at. Close the
microwave door. IMPORTANT: You should make sure that the
door of the microwave is shut securely.
o When the time of day that you have programmed is reached, the
microwave will bleep twice and then the microwave will start
cooking automatically.
o IMPORTANT: If the microwave door is not shut when the time
of day that you have programmed is reached, then cooking will
not commence.
18