Table of Contents
Advertisement
Automatic defrost programmes
o Use the door open button (7) to open the door of the
microwave.
o Check that the rotating plate and rotating base are correctly
assembled in the cavity.
o Place whatever you are defrosting in the centre of the microwave
cavity. IMPORTANT: You will need to leave the microwave door
open to access the control panel and set the required defrost
program and food weight.
o Press the auto defrost button (G) and the LED display will show
d.1, d.2, d.3.
LED display
d.1
d.2
d.3
o Once the correct defrost programme is displayed, press the time
weight button (I) to set the weight of the food that you are
defrosting.
o Close the microwave door. IMPORTANT: You should make sure
that the door of the microwave is shut securely. Press the instant
start button (F) and the microwave will start to defrost.
o At certain points in the defrosting process, the microwave will
give an audible signal. When this occurs, you should open the
door of the microwave and turn the food over.
o To restart the cooking process, close the door and then press the
instant start button once.
o At the end of the defrosting time, your microwave will give an
audible signal and the LED display will show the word "END".
o The audible signal will be repeated every 3 minutes, until the
stop clear button is pressed or the door is opened by pressing
the door open button.
Defrost level
suitable for...
Defrosting meat
Defrosting poultry
Defrosting seafood
Weight range
(kg)
0.1 – 2.0
0.2 – 3.0
0.1 – 0.9
15
Advertisement
Table of Contents
