Using Your Microwave; Setting The Clock; Before First Use - Baumatic BTM17.4SS Instruction Manual

Using your microwave

Setting the clock

o When your microwave is connected to the power supply, you can
set the clock to the correct time of day. You will need to open
the microwave door to access the control panel.
o The entire LED display will flash and then the ":" symbol on its
own. You should press the preset clock button (C) to set the
time of day. The appliance has a 24 hour clock.
o Press the time weight button (I) and the hour digits will start to
flash. Continue to press the time weight button until the correct
hour digit is displayed.
o Press the preset clock button again to confirm the hour time. The
minute digits will start to flash. Continue to press the time
weight button until the correct minute digit is displayed.
o Press the preset clock button for a third time to confirm the
minute time. The digits on the LED display will stop flashing and
the time of day is set.
o If you do not set the time of day, every time you connect your
microwave to the power supply, you will need to press the stop
clear button (E) once before you can use the microwave.

Before first use

o To remove any residue from the oven that may have been left
from the manufacturing process, you should place a cup that is
half filled with water in the microwave.
o Set the microwave on its highest power level for 2 minutes.
o The oven cavity and outside of the appliance should be cleaned
with warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used. The appliance should be
thoroughly dried afterwards.
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
12