Setting Multiple Cooking Phases - Baumatic BTM17.4SS Instruction Manual

o Close the microwave door. IMPORTANT: You should make sure
that the door of the microwave is shut securely. Press the instant
start button (F) and the microwave will start to heat.
o At the end of the cooking time, your microwave will give an
audible signal and the LED display will show the word "END".
o The audible signal will be repeated every 3 minutes, until the
stop clear button is pressed or the door is opened by pressing
the door open button.

Setting multiple cooking phases

It is possible to set the microwave to cook at different power levels
within a single cooking time. A maximum number of 4 cooking phases
can be set at once.
o IMPORTANT: You will need to leave the microwave door open
to access the control panel and set the required power level and
time.
o Press the micro power button (A) to set the required power level
for the first cooking phase. 100P, 80P, 60P, 40P, 20P will appear
on the LED display.
o Press the time weight button (I) to set the cooking time for the
first cooking phase.
o It is possible to program a further 3 cooking phases by following
the above two steps.
o When you have set the final cooking phase close the microwave
door. IMPORTANT: You should make sure that the door of the
microwave is shut securely. Press the instant start button (F)
and the microwave will start the first cooking phase.
o When the first cooking phase has completed, it will automatically
move onto the next cooking phase.
o At the end of all of the cooking phases, your microwave will give
an audible signal and the LED display will show the word "END".
o The audible signal will be repeated every 3 minutes, until the
stop clear button is pressed or the door is opened by pressing
the door open button.
o After the food has been removed from the microwave, you
should make sure that the door is closed.
17