Table of Contents
Advertisement
INTRODUCTION
Intended Use
Optimal use and maintenance are described in these instructions. This product is not intended for industrial or commercial use.
Additional assistance, by region, may be found online at www.singer.com.
Machine Overview
6
5
4
3
1
1. Accessory Tray / Free Arm — provides a flat surface when
sewing and allows storage for your accessories. Remove the
accessory tray to use the free arm which makes it easier to
sew, e.g., trouser hems and sleeves.
2. Presser Foot Lifter
3. Thread Knife — for trimming thread ends at the end of
sewing.
4. Thread Tension Disks — positioned behind the thread
tension dial.
5. Thread Tension Dial — adjustable for setting the desired
tension for your stitch, thread and fabric.
Top of Machine
1. Thread take-up lever
2. Bobbin winding tension disc
3. Thread guides
4. Handle
5. Spool pin
6. Bobbin winding stopper
7. Bobbin winding spindle
2
6. Threading Slots — thread paths with tension discs and take up
lever.
7. Hand Wheel — used to manually control the movement of the
needle and the thread take-up lever.
8. Stitch Selector Dial — is used to select stitch patterns and
buttonhole settings (see page 12).
9. Buttonhole Balance
10. Reverse Sewing Lever — press and hold to sew in reverse, e.g.,
when securing the beginning or ending of a seam.
11. Power and foot control socket
12. On/Off switch
1
2
3
4
7
8
9
10
11
12
5
7
6
Advertisement
Table of Contents
